Finishing Coat

Preparation

• Surfaces should be clean, dry, free from old/flaking paint, oil or wax
• You can watch our video on how to prepare surfaces for painting here
• Shake well before use
• Pour the required amount into a suitable, clean container
• Reseal the bottle
  

Application, drying and curing

• Best applied with a sponge or brush
• When using as a top coat, refer to the paint's drying instructions for time to wait before applying
• Watch our Finsihing Coat tips and demo video on Frenchic TV, here
• For exterior projects, avoid painting in direct sunlight, only when the air and surface temperatures are between 10°C and 32°C and humidity is less than 85%
• Do not apply if, in the following 48 hours, there is likelihood of rain, frost, fog, condensation or if the temperature is likely to drop lower than 10°C. This means that certain times of the year are unsuitable for painting outside projects - as a general rule of thumb Summer is recommended
• Allow a minimum of 1 hour between coats
• Curing time is up to 1 week in normal conditions
  

Clean up and storage

• Reseal bottle after use
• Clean up any spills immediately with water
• Wash sponges/brushes in warm, soapy water
• Do not store where the bottle could be subjected to damp, frost, freezing or high temperatures